stable/docs/utils.md

162 lines
7.7 KiB
Markdown

# Utility Subcommands
Besides the Live-Trade and Dry-Run run modes, the `backtesting`, `edge` and `hyperopt` optimization subcommands, and the `download-data` subcommand which prepares historical data, the bot contains a number of utility subcommands. They are described in this section.
## Create userdir
Creates the directory structure to hold your files for freqtrade.
Will also create strategy and hyperopt examples for you to get started.
Can be used multiple times - using `--reset` will reset the sample strategy and hyperopt files to their default state.
```
usage: freqtrade create-userdir [-h] [--userdir PATH] [--reset]
optional arguments:
-h, --help show this help message and exit
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
--reset Reset sample files to their original state.
```
!!! Warning
Using `--reset` may result in loss of data, since this will overwrite all sample files without asking again.
```
├── backtest_results
├── data
├── hyperopt_results
├── hyperopts
│   ├── sample_hyperopt_advanced.py
│   ├── sample_hyperopt_loss.py
│   └── sample_hyperopt.py
├── notebooks
│   └── strategy_analysis_example.ipynb
├── plot
└── strategies
└── sample_strategy.py
```
## List Exchanges
Use the `list-exchanges` subcommand to see the exchanges available for the bot.
```
usage: freqtrade list-exchanges [-h] [-1] [-a]
optional arguments:
-h, --help show this help message and exit
-1, --one-column Print output in one column.
-a, --all Print all exchanges known to the ccxt library.
```
* Example: see exchanges available for the bot:
```
$ freqtrade list-exchanges
Exchanges available for Freqtrade: _1btcxe, acx, allcoin, bequant, bibox, binance, binanceje, binanceus, bitbank, bitfinex, bitfinex2, bitkk, bitlish, bitmart, bittrex, bitz, bleutrade, btcalpha, btcmarkets, btcturk, buda, cex, cobinhood, coinbaseprime, coinbasepro, coinex, cointiger, coss, crex24, digifinex, dsx, dx, ethfinex, fcoin, fcoinjp, gateio, gdax, gemini, hitbtc2, huobipro, huobiru, idex, kkex, kraken, kucoin, kucoin2, kuna, lbank, mandala, mercado, oceanex, okcoincny, okcoinusd, okex, okex3, poloniex, rightbtc, theocean, tidebit, upbit, zb
```
* Example: see all exchanges supported by the ccxt library (including 'bad' ones, i.e. those that are known to not work with Freqtrade):
```
$ freqtrade list-exchanges -a
All exchanges supported by the ccxt library: _1btcxe, acx, adara, allcoin, anxpro, bcex, bequant, bibox, bigone, binance, binanceje, binanceus, bit2c, bitbank, bitbay, bitfinex, bitfinex2, bitflyer, bitforex, bithumb, bitkk, bitlish, bitmart, bitmex, bitso, bitstamp, bitstamp1, bittrex, bitz, bl3p, bleutrade, braziliex, btcalpha, btcbox, btcchina, btcmarkets, btctradeim, btctradeua, btcturk, buda, bxinth, cex, chilebit, cobinhood, coinbase, coinbaseprime, coinbasepro, coincheck, coinegg, coinex, coinexchange, coinfalcon, coinfloor, coingi, coinmarketcap, coinmate, coinone, coinspot, cointiger, coolcoin, coss, crex24, crypton, deribit, digifinex, dsx, dx, ethfinex, exmo, exx, fcoin, fcoinjp, flowbtc, foxbit, fybse, gateio, gdax, gemini, hitbtc, hitbtc2, huobipro, huobiru, ice3x, idex, independentreserve, indodax, itbit, kkex, kraken, kucoin, kucoin2, kuna, lakebtc, latoken, lbank, liquid, livecoin, luno, lykke, mandala, mercado, mixcoins, negociecoins, nova, oceanex, okcoincny, okcoinusd, okex, okex3, paymium, poloniex, rightbtc, southxchange, stronghold, surbitcoin, theocean, therock, tidebit, tidex, upbit, vaultoro, vbtc, virwox, xbtce, yobit, zaif, zb
```
## List Timeframes
Use the `list-timeframes` subcommand to see the list of ticker intervals (timeframes) available for the exchange.
```
usage: freqtrade list-timeframes [-h] [--exchange EXCHANGE] [-1]
optional arguments:
-h, --help show this help message and exit
--exchange EXCHANGE Exchange name (default: `bittrex`). Only valid if no
config is provided.
-1, --one-column Print output in one column.
```
* Example: see the timeframes for the 'binance' exchange, set in the configuration file:
```
$ freqtrade -c config_binance.json list-timeframes
...
Timeframes available for the exchange `binance`: 1m, 3m, 5m, 15m, 30m, 1h, 2h, 4h, 6h, 8h, 12h, 1d, 3d, 1w, 1M
```
* Example: enumerate exchanges available for Freqtrade and print timeframes supported by each of them:
```
$ for i in `freqtrade list-exchanges -1`; do freqtrade list-timeframes --exchange $i; done
```
## List pairs/list markets
The `list-pairs` and `list-markets` subcommands allow to see the pairs/markets available on exchange.
Pairs are markets with the '/' character between the base currency part and the quote currency part in the market symbol.
For example, in the 'ETH/BTC' pair 'ETH' is the base currency, while 'BTC' is the quote currency.
For pairs traded by Freqtrade the pair quote currency is defined by the value of the `stake_currency` configuration setting.
You can print info about any pair/market with these subcommands - and you can filter output by quote-currency using `--quote BTC`, or by base-currency using `--base ETH` options correspondingly.
These subcommands have same usage and same set of available options:
```
usage: freqtrade list-markets [-h] [--exchange EXCHANGE] [--print-list]
[--print-json] [-1] [--print-csv]
[--base BASE_CURRENCY [BASE_CURRENCY ...]]
[--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
[-a]
usage: freqtrade list-pairs [-h] [--exchange EXCHANGE] [--print-list]
[--print-json] [-1] [--print-csv]
[--base BASE_CURRENCY [BASE_CURRENCY ...]]
[--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]] [-a]
optional arguments:
-h, --help show this help message and exit
--exchange EXCHANGE Exchange name (default: `bittrex`). Only valid if no
config is provided.
--print-list Print list of pairs or market symbols. By default data
is printed in the tabular format.
--print-json Print list of pairs or market symbols in JSON format.
-1, --one-column Print output in one column.
--print-csv Print exchange pair or market data in the csv format.
--base BASE_CURRENCY [BASE_CURRENCY ...]
Specify base currency(-ies). Space-separated list.
--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
Specify quote currency(-ies). Space-separated list.
-a, --all Print all pairs or market symbols. By default only
active ones are shown.
```
By default, only active pairs/markets are shown. Active pairs/markets are those that can currently be traded
on the exchange. The see the list of all pairs/markets (not only the active ones), use the `-a`/`-all` option.
Pairs/markets are sorted by its symbol string in the printed output.
### Examples
* Print the list of active pairs with quote currency USD on exchange, specified in the default
configuration file (i.e. pairs on the "Bittrex" exchange) in JSON format:
```
$ freqtrade list-pairs --quote USD --print-json
```
* Print the list of all pairs on the exchange, specified in the `config_binance.json` configuration file
(i.e. on the "Binance" exchange) with base currencies BTC or ETH and quote currencies USDT or USD, as the
human-readable list with summary:
```
$ freqtrade -c config_binance.json list-pairs --all --base BTC ETH --quote USDT USD --print-list
```
* Print all markets on exchange "Kraken", in the tabular format:
```
$ freqtrade list-markets --exchange kraken --all
```