Webhook usage

Configuration

Enable webhooks by adding a webhook-section to your configuration file, and setting webhook.enabled to true.

Sample configuration (tested using IFTTT).

  "webhook": {
        "enabled": true,
        "url": "https://maker.ifttt.com/trigger/<YOUREVENT>/with/key/<YOURKEY>/",
        "webhookbuy": {
            "value1": "Buying {pair}",
            "value2": "limit {limit:8f}",
            "value3": "{stake_amount:8f} {stake_currency}"
        },
        "webhookbuycancel": {
            "value1": "Cancelling Open Buy Order for {pair}",
            "value2": "limit {limit:8f}",
            "value3": "{stake_amount:8f} {stake_currency}"
        },
         "webhookbuyfill": {
            "value1": "Buy Order for {pair} filled",
            "value2": "at {open_rate:8f}",
            "value3": ""
        },
        "webhooksell": {
            "value1": "Selling {pair}",
            "value2": "limit {limit:8f}",
            "value3": "profit: {profit_amount:8f} {stake_currency} ({profit_ratio})"
        },
        "webhooksellcancel": {
            "value1": "Cancelling Open Sell Order for {pair}",
            "value2": "limit {limit:8f}",
            "value3": "profit: {profit_amount:8f} {stake_currency} ({profit_ratio})"
        },
        "webhooksellfill": {
            "value1": "Sell Order for {pair} filled",
            "value2": "at {close_rate:8f}.",
            "value3": ""
        },
        "webhookstatus": {
            "value1": "Status: {status}",
            "value2": "",
            "value3": ""
        }
    },

The url in webhook.url should point to the correct url for your webhook. If you're using IFTTT (as shown in the sample above) please insert your event and key to the url.

You can set the POST body format to Form-Encoded (default), JSON-Encoded, or raw data. Use "format": "form", "format": "json", or "format": "raw" respectively. Example configuration for Mattermost Cloud integration:

  "webhook": {
        "enabled": true,
        "url": "https://<YOURSUBDOMAIN>.cloud.mattermost.com/hooks/<YOURHOOK>",
        "format": "json",
        "webhookstatus": {
            "text": "Status: {status}"
        }
    },

The result would be a POST request with e.g. {"text":"Status: running"} body and Content-Type: application/json header which results Status: running message in the Mattermost channel.

When using the Form-Encoded or JSON-Encoded configuration you can configure any number of payload values, and both the key and value will be ouput in the POST request. However, when using the raw data format you can only configure one value and it must be named "data". In this instance the data key will not be output in the POST request, only the value. For example:

  "webhook": {
        "enabled": true,
        "url": "https://<YOURHOOKURL>",
        "format": "raw",
        "webhookstatus": {
            "data": "Status: {status}"
        }
    },

The result would be a POST request with e.g. Status: running body and Content-Type: text/plain header.

Optional parameters are available to enable automatic retries for webhook messages. The webhook.retries parameter can be set for the maximum number of retries the webhook request should attempt if it is unsuccessful (i.e. HTTP response status is not 200). By default this is set to 0 which is disabled. An additional webhook.retry_delay parameter can be set to specify the time in seconds between retry attempts. By default this is set to 0.1 (i.e. 100ms). Note that increasing the number of retries or retry delay may slow down the trader if there are connectivity issues with the webhook. Example configuration for retries:

  "webhook": {
        "enabled": true,
        "url": "https://<YOURHOOKURL>",
        "retries": 3,
        "retry_delay": 0.2,
        "webhookstatus": {
            "status": "Status: {status}"
        }
    },

Different payloads can be configured for different events. Not all fields are necessary, but you should configure at least one of the dicts, otherwise the webhook will never be called.

Webhookbuy

The fields in webhook.webhookbuy are filled when the bot executes a long/short. Parameters are filled using string.format. Possible parameters are:

trade_id
exchange
pair
direction
leverage
~~limit # Deprecated - should no longer be used.~~
open_rate
amount
open_date
stake_amount
stake_currency
base_currency
fiat_currency
order_type
current_rate
enter_tag

Webhookbuycancel

The fields in webhook.webhookbuycancel are filled when the bot cancels a long/short order. Parameters are filled using string.format. Possible parameters are:

trade_id
exchange
pair
direction
leverage
limit
amount
open_date
stake_amount
stake_currency
base_currency
fiat_currency
order_type
current_rate
enter_tag

Webhookbuyfill

The fields in webhook.webhookbuyfill are filled when the bot filled a long/short order. Parameters are filled using string.format. Possible parameters are:

trade_id
exchange
pair
direction
leverage
open_rate
amount
open_date
stake_amount
stake_currency
base_currency
fiat_currency
order_type
current_rate
enter_tag

Webhooksell

The fields in webhook.webhooksell are filled when the bot sells a trade. Parameters are filled using string.format. Possible parameters are:

trade_id
exchange
pair
direction
leverage
gain
limit
amount
open_rate
profit_amount
profit_ratio
stake_currency
base_currency
fiat_currency
exit_reason
order_type
open_date
close_date

Webhooksellfill

The fields in webhook.webhooksellfill are filled when the bot fills a sell order (closes a Trae). Parameters are filled using string.format. Possible parameters are:

trade_id
exchange
pair
direction
leverage
gain
close_rate
amount
open_rate
current_rate
profit_amount
profit_ratio
stake_currency
base_currency
fiat_currency
exit_reason
order_type
open_date
close_date

Webhooksellcancel

The fields in webhook.webhooksellcancel are filled when the bot cancels a sell order. Parameters are filled using string.format. Possible parameters are:

trade_id
exchange
pair
direction
leverage
gain
limit
amount
open_rate
current_rate
profit_amount
profit_ratio
stake_currency
base_currency
fiat_currency
exit_reason
order_type
open_date
close_date

Webhookstatus

The fields in webhook.webhookstatus are used for regular status messages (Started / Stopped / ...). Parameters are filled using string.format.

The only possible value here is {status}.

6.8 KiB Raw Blame History