122 lines
5.0 KiB
Bash
122 lines
5.0 KiB
Bash
# lxd / maas issue. either upgrade lxd or maas to 3.1
|
|
sudo snap switch --channel=4.19/stable lxd
|
|
sudo snap refresh lxd
|
|
|
|
#get local interface name (this assumes a single default route is present)
|
|
export INTERFACE=$(ip route | grep default | cut -d ' ' -f 5)
|
|
export IP_ADDRESS=$(ip -4 addr show dev $INTERFACE | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
|
|
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf
|
|
sysctl -p
|
|
iptables -t nat -A POSTROUTING -o $INTERFACE -j SNAT --to $IP_ADDRESS
|
|
#TODO inbound port forwarding/load balancing
|
|
# Persist NAT configuration
|
|
echo iptables-persistent iptables-persistent/autosave_v4 boolean true | sudo debconf-set-selections
|
|
echo iptables-persistent iptables-persistent/autosave_v6 boolean true | sudo debconf-set-selections
|
|
apt-get install iptables-persistent -y
|
|
# LXD init
|
|
cat /tmp/lxd.cfg | lxd init --preseed
|
|
# Wait for LXD to be ready
|
|
lxd waitready
|
|
# Initialise MAAS
|
|
maas init region+rack --database-uri maas-test-db:/// --maas-url http://${IP_ADDRESS}:5240/MAAS
|
|
sleep 15
|
|
# Create MAAS admin and grab API key
|
|
maas createadmin --username admin --password admin --email admin
|
|
export APIKEY=$(maas apikey --username admin)
|
|
# MAAS admin login
|
|
maas login admin 'http://localhost:5240/MAAS/' $APIKEY
|
|
# Configure MAAS networking (set gateways, vlans, DHCP on etc)
|
|
export SUBNET=10.10.10.0/24
|
|
export FABRIC_ID=$(maas admin subnet read "$SUBNET" | jq -r ".vlan.fabric_id")
|
|
export VLAN_TAG=$(maas admin subnet read "$SUBNET" | jq -r ".vlan.vid")
|
|
export PRIMARY_RACK=$(maas admin rack-controllers read | jq -r ".[] | .system_id")
|
|
maas admin subnet update $SUBNET gateway_ip=10.10.10.1
|
|
maas admin ipranges create type=dynamic start_ip=10.10.10.200 end_ip=10.10.10.254
|
|
maas admin vlan update $FABRIC_ID $VLAN_TAG dhcp_on=True primary_rack=$PRIMARY_RACK
|
|
maas admin maas set-config name=upstream_dns value=8.8.8.8
|
|
# Add LXD as a VM host for MAAS
|
|
maas admin vm-hosts create password=password type=lxd power_address=https://${IP_ADDRESS}:8443 project=maas
|
|
|
|
# creating VMs
|
|
# TODO find out the name of our vm host, and store this id in a variable
|
|
|
|
export VM_HOST_ID=maas admin vm-hosts read | jq -r --arg VM_HOST "$(hostname)" '.[] | select (.name==$VM_HOST) | .id'
|
|
# add a VM for the juju controller with minimal memory
|
|
# TODO use the variable for the VM host ID (below it is static 1). If you don't have 8 cores, change this to 4.
|
|
maas admin vm-host compose $VM_HOST_ID cores=8 memory=2048 architecture="amd64/generic" storage="main:16(pool1)"
|
|
#TODO get the system_id from output of above, and use it with:
|
|
# maas admin tag update-nodes "juju-controller" add=$SYSTEM-ID
|
|
|
|
## Create 3 "bare metal" machines
|
|
maas admin vm-host compose $VM_HOST_ID cores=8 memory=8192 architecture="amd64/generic" storage="main:25(pool1),ceph:150(pool1)" hostname="metal-1"
|
|
# TODO grab system-id and tag machine "metal"
|
|
maas admin vm-host compose $VM_HOST_ID cores=8 memory=8192 architecture="amd64/generic" storage="main:25(pool1),ceph:150(pool1)" hostname="metal-2"
|
|
# TODO grab system-id and tag machine "metal"
|
|
maas admin vm-host compose $VM_HOST_ID cores=8 memory=8192 architecture="amd64/generic" storage="main:25(pool1),ceph:150(pool1)" hostname="metal-3"
|
|
# TODO grab system-id and tag machine "metal"
|
|
|
|
# Go to the MAAS UI, log in with username admin password admin, and tag the machines
|
|
# Browse to http://localhost:5240/MAAS/ - select the 3 machines metal-1, metal-2, and metal-3, click actions - add tag "metal"
|
|
|
|
### Juju setup (note, this section requires manual intervention)
|
|
cd ~
|
|
sudo snap install juju --classic
|
|
sed -i 's/IP_ADDRESS/${IP_ADDRESS}/' maas-cloud.yaml
|
|
juju add-cloud --local maas-cloud maas-cloud.yaml
|
|
juju add-credential maas-cloud
|
|
juju clouds --local
|
|
juju credentials
|
|
# Bootstrap the maas-cloud - get a coffee
|
|
juju bootstrap maas-cloud --bootstrap-constraints "tags=juju-controller mem=2G"
|
|
|
|
# fire up the juju gui to view the fun
|
|
juju gui
|
|
# get coffee
|
|
|
|
### Ceph
|
|
juju deploy -n 3 ceph-mon --to lxd:0,lxd:1,lxd:2
|
|
juju deploy --config ceph-osd.yaml cs:ceph-osd -n 3 --to 0,1,2
|
|
juju add-relation ceph-mon ceph-osd
|
|
|
|
# watch the fun (with a another coffee).
|
|
watch -c juju status --color
|
|
# Wait for Ceph to settle before proceeding
|
|
|
|
### Kubernetes
|
|
|
|
# Deploy kubernetes-core with juju and re-use existing machines.
|
|
juju deploy kubernetes-core --map-machines=existing,0=0,1=1
|
|
|
|
# add the new kubernetes as a cloud to juju
|
|
mkdir ~/.kube
|
|
juju scp kubernetes-master/1:/home/ubuntu/config ~/.kube/config
|
|
|
|
# add storage relations
|
|
juju add-relation ceph-mon:admin kubernetes-master
|
|
juju add-relation ceph-mon:client kubernetes-master
|
|
|
|
# add k8s to juju (choose option 1, client only)
|
|
juju add-k8s my-k8s
|
|
|
|
juju bootstrap my-k8s
|
|
|
|
|
|
|
|
### Deploying applications
|
|
# juju add-model some-model my-k8s
|
|
# juju deploy someapp(s)
|
|
|
|
### Cleanup? not sure this always works.
|
|
|
|
#juju destroy-controller -y --destroy-all-models --destroy-storage maas-cloud-default
|
|
|
|
### Notes / LMA stack deployment
|
|
## add an LMA model to the cluster
|
|
juju add-model lma my-k8s
|
|
|
|
juju deploy lma-light --channel=edge --trust
|
|
|
|
## random notes
|
|
# get some storage going
|
|
# https://jaas.ai/ceph-base
|
|
# https://jaas.ai/canonical-kubernetes/bundle/471 |