* kgctl connect
Use kgctl connect to connect your laptop to a cluster.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* cmd/kgctl: finish connect command
This commit fixes some bugs and finishes the implementation of the
`kgctl connect` command.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
* e2e: add tests for kgctl connect
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
* docs: add documentation for `kgctl connect`
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
* pkg/mesh: move peer route generation to mesh
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
Co-authored-by: Lucas Servén Marín <lserven@gmail.com>
Currently, when rendering the configuration for a Peer, the allowed
location configs of any segment are erroneously ignored, meaning that an
administrator will have to manually edit the configuration to get the
expected behavior from a Peer. This commit fixes the generation of the
configuration.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
* migrate to golang.zx2c4.com/wireguard/wgctrl
This commit introduces the usage of wgctrl.
It avoids the usage of exec calls of the wg command
and parsing the output of `wg show`.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* vendor wgctrl
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* apply suggestions from code review
Remove wireguard.Enpoint struct and use net.UDPAddr for the resolved
endpoint and addr string (dnsanme:port) if a DN was supplied.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* pkg/*: use wireguard.Enpoint
This commit introduces the wireguard.Enpoint struct.
It encapsulates a DN name with port and a net.UPDAddr.
The fields are private and only accessible over exported Methods
to avoid accidental modification.
Also iptables.GetProtocol is improved to avoid ipv4 rules being applied
by `ip6tables`.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* pkg/wireguard/conf_test.go: add tests for Endpoint
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* cmd/kg/main.go: validate port range
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* add suggestions from review
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* pkg/mesh/mesh.go: use Equal func
Implement an Equal func for Enpoint and use it instead of comparing
strings.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* cmd/kgctl/main.go: check port range
Signed-off-by: leonnicolas <leonloechner@gmx.de>
* vendor
Signed-off-by: leonnicolas <leonloechner@gmx.de>
Before this commit we added the forward ALLOW rule only for the node's
pod CIDR and not all pod CIDRs of a location. This commit adds the
forward ALLOW rule for packages from (source) and to (destination) all
pod CIDRs of the location if the node is a leader node.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
Users can specify IPs with the annotation "allowed-location-ips".
It makes no difference which node of a location is annotated.
The IP should be routable from the particular location, e.g. a printer in
the same LAN.
This way these IPs become routable from other location.
Signed-off-by: leonnicolas <leonloechner@gmx.de>
Co-authored-by: Lucas Servén Marín <lserven@gmail.com>
* wireguard: export an Endpoint comparison method
* Record discovered endpoints in node
* Synchronize DiscoveredEndpoints in k8s backend
* Add discoveredEndpointsAreEqual
* Handle discovered Endpoints in topology to enable NAT 2 NAT
* Refactor to use Endpoint.Equal
Compare IP first by default and compare DNS name first when we know the Endpoint was resolved.
* Drop the shallow copies of nodes and peers
Now that updateNATEndpoints was updated to discoverNATEndpoints and that
the endpoints are overridden by topology instead of mutating the nodes and
peers object, we can safely drop this copy.
Commit 4d00bc56fe introduced a bug in the
Kilo graph generation logic. This commit used the WireGuard CIDR from
the topology struct as the graph title, however this field is nil
whenever the selected node is not a leader, causing the program to
panic.
This commit changes the meaning of the topology struct's wireGuardCIDR
field so that the field is always defined and the normalized value will
always be equal to the Kilo subnet CIDR. When the selected node is a
leader node, then the field's IP will be the IP allocated to the node
within the subnet. This effectively prevents the program from panicking.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit adds support for defining preshared keys when declaring a
new Peer CRD. This preshared key will be used whenever the nodes in the
Kilo mesh communicate with that peer.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit enables simultaneously managing IPv4 and IPv6 iptables
rules. This makes it possible to have peers with IPv6 allowed IPs in an
otherwise IPv4 stack and vice versa.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit enables NAT-ing packets outgoing to the WAN from both the
Pod subnet as well as from peers. This means that Pods can access the
Internet and that peers can use the Kilo mesh as a gateway to the
Internet.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit re-enables old functionality, which permitted the generation
of the configuration for a cluster without any peers.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit documents the use of the persistent-keepalive annotation and
corrects the implementation of keepalives.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit allows DNS names to be used when specifying the endpoint
for a node in the WireGuard mesh. This is useful in many scenarios, in
particular when operating an IoT device whose public IP is dynamic. This
change allows the administrator to use a dynamic DNS name in the node's
endpoint.
One of the side-effects of this change is that the WireGuard port can
now be specified individually for each node in the mesh, if the
administrator wishes to do so.
*Note*: this commit introduces a breaking change; the
`force-external-ip` node annotation has been removed; its functionality
has been ported over to the `force-endpoint` annotation. This annotation
is documented in the annotations.md file. The expected content of this
annotation is no longer a CIDR but rather a host:port. The host can be
either a DNS name or an IP.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit entirely replaces NAT in Kilo with a few iproute2 rules.
Previously, Kilo would source-NAT the majority of packets in order to
avoid problems with strict source checks in cloud providers causing
packets to be considered martians. This source-NAT-ing made it
difficult to correctly apply Kuberenetes NetworkPolicies based on source
IPs.
This rewrite instead relies on a handful of iproute2 rules to ensure
that packets get encapsulated in certain scenarios based on the source
network and/or source interface.
This has the benefit of avoiding extra iptables bloat as well as
enabling better compatibility with NetworkPolicies.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit cleans up the iptables package to allow other packages to
create rules.
This commit also removes all NAT from Kilo.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit fixes the ip allocator `newAllocator` to produce IP
addresses with the original network mask. This is makes more sense. The
original functionality can be reproduced by wrapping the produced IP
address with the `oneAddressCIDR` helper.
Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
This commit adds basic support to run in compatibility mode with
Flannel. This allows clusters running Flannel as their principal
networking solution to leverage some advances Kilo features. In certain
Flannel setups, the clusters can even leverage muti-cloud. For this, the
cluster needs to either run in a full mesh, or Flannel needs to use the
API server's external IP address.
Add an exception to the route generation rules for when the external IP
of a node equals the internal IP. In this case, we cannot route traffic
through a tunnel.
We need to defensively deduplicate peer allowed IPs.
If two peers claim the same IP, the WireGuard configuration
could flap, causing the interface to churn.
This commit adds several output options to the `showconf` command of the
`kgctl` binary:
* `--as-peer`: this can be used to generate a peer configuration, which
can be used to configure the selected resource as a peer of another
WireGuard interface
* `--output`: this can be used to select the desired output format of
the peer resource, available options are: WireGuard, YAML, and JSON.
This commit enables Kilo to work as an independent networking provider.
This is done by leveraging CNI. Kilo brings the necessary CNI plugins to
operate and takes care of all networking.
Add-on compatibility for Calico, Flannel, etc, will be re-introduced
shortly.
