stable/tests/optimize/test_backtest_detail.py
2019-09-08 19:47:16 +02:00

320 lines
13 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# pragma pylint: disable=missing-docstring, W0212, line-too-long, C0103, C0330, unused-argument
import logging
from unittest.mock import MagicMock
import pytest
from pandas import DataFrame
from freqtrade.data.history import get_timeframe
from freqtrade.optimize.backtesting import Backtesting
from freqtrade.strategy.interface import SellType
from tests.conftest import patch_exchange
from tests.optimize import (BTContainer, BTrade, _build_backtest_dataframe,
_get_frame_time_from_offset, tests_ticker_interval)
# Test 0: Sell with signal sell in candle 3
# Test with Stop-loss at 1%
tc0 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4986, 4600, 6172, 0, 0], # exit with stoploss hit
[3, 5010, 5000, 4980, 5010, 6172, 0, 1],
[4, 5010, 4987, 4977, 4995, 6172, 0, 0],
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi=1, profit_perc=0.002, use_sell_signal=True,
trades=[BTrade(sell_reason=SellType.SELL_SIGNAL, open_tick=1, close_tick=4)]
)
# Test 1: Stop-Loss Triggered 1% loss
# Test with Stop-loss at 1%
tc1 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4600, 4600, 6172, 0, 0], # exit with stoploss hit
[3, 4975, 5000, 4980, 4977, 6172, 0, 0],
[4, 4977, 4987, 4977, 4995, 6172, 0, 0],
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi=1, profit_perc=-0.01,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 2: Minus 4% Low, minus 1% close
# Test with Stop-Loss at 3%
tc2 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4962, 4975, 6172, 0, 0],
[3, 4975, 5000, 4800, 4962, 6172, 0, 0], # exit with stoploss hit
[4, 4962, 4987, 4937, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.03, roi=1, profit_perc=-0.03,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 3: Multiple trades.
# Candle drops 4%, Recovers 1%.
# Entry Criteria Met
# Candle drops 20%
# Trade-A: Stop-Loss Triggered 2% Loss
# Trade-B: Stop-Loss Triggered 2% Loss
tc3 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4800, 4975, 6172, 0, 0], # exit with stoploss hit
[3, 4975, 5000, 4950, 4962, 6172, 1, 0],
[4, 4975, 5000, 4950, 4962, 6172, 0, 0], # enter trade 2 (signal on last candle)
[5, 4962, 4987, 4000, 4000, 6172, 0, 0], # exit with stoploss hit
[6, 4950, 4975, 4975, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi=1, profit_perc=-0.04,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2),
BTrade(sell_reason=SellType.STOP_LOSS, open_tick=4, close_tick=5)]
)
# Test 4: Minus 3% / recovery +15%
# Candle Data for test 3 Candle drops 3% Closed 15% up
# Test with Stop-loss at 2% ROI 6%
# Stop-Loss Triggered 2% Loss
tc4 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5750, 4850, 5750, 6172, 0, 0], # Exit with stoploss hit
[3, 4975, 5000, 4950, 4962, 6172, 0, 0],
[4, 4962, 4987, 4937, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi=0.06, profit_perc=-0.02,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 5: Drops 0.5% Closes +20%, ROI triggers 3% Gain
# stop-loss: 1%, ROI: 3%
tc5 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4980, 4987, 6172, 1, 0],
[1, 5000, 5025, 4980, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5025, 4975, 4987, 6172, 0, 0],
[3, 4975, 6000, 4975, 6000, 6172, 0, 0], # ROI
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi=0.03, profit_perc=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 6: Drops 3% / Recovers 6% Positive / Closes 1% positve, Stop-Loss triggers 2% Loss
# stop-loss: 2% ROI: 5%
tc6 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5300, 4850, 5050, 6172, 0, 0], # Exit with stoploss
[3, 4975, 5000, 4950, 4962, 6172, 0, 0],
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi=0.05, profit_perc=-0.02,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 7: 6% Positive / 1% Negative / Close 1% Positve, ROI Triggers 3% Gain
# stop-loss: 2% ROI: 3%
tc7 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5050, 6172, 0, 0],
[3, 4975, 5000, 4950, 4962, 6172, 0, 0],
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi=0.03, profit_perc=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=2)]
)
# Test 8: trailing_stop should raise so candle 3 causes a stoploss.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted in candle 2
tc8 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5000, 6172, 0, 0],
[2, 5000, 5250, 4750, 4850, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi=0.10, profit_perc=-0.055, trailing_stop=True,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 9: trailing_stop should raise - high and low in same candle.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted in candle 3
tc9 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5000, 6172, 0, 0],
[2, 5000, 5050, 4950, 5000, 6172, 0, 0],
[3, 5000, 5200, 4550, 4850, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi=0.10, profit_perc=-0.064, trailing_stop=True,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 10: trailing_stop should raise so candle 3 causes a stoploss
# without applying trailing_stop_positive since stoploss_offset is at 10%.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc10 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi=0.10, profit_perc=-0.1, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.10,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=4)]
)
# Test 11: trailing_stop should raise so candle 3 causes a stoploss
# applying a positive trailing stop of 3% since stop_positive_offset is reached.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc11 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi=0.10, profit_perc=0.019, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 12: trailing_stop should raise in candle 2 and cause a stoploss in the same candle
# applying a positive trailing stop of 3% since stop_positive_offset is reached.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc12 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 4650, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi=0.10, profit_perc=0.019, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 13: Buy and sell ROI on same candle
# stop-loss: 10% (should not apply), ROI: 1%
tc13 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5100, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 4850, 5100, 6172, 0, 0],
[3, 4850, 5050, 4850, 4750, 6172, 0, 0],
[4, 4750, 4950, 4850, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi=0.01, profit_perc=0.01,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=1)]
)
# Test 14 - Buy and Stoploss on same candle
# stop-loss: 5%, ROI: 10% (should not apply)
tc14 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5100, 4600, 5100, 6172, 0, 0],
[2, 5100, 5251, 4850, 5100, 6172, 0, 0],
[3, 4850, 5050, 4850, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.05, roi=0.10, profit_perc=-0.05,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=1)]
)
# Test 15 - Buy and ROI on same candle, followed by buy and Stoploss on next candle
# stop-loss: 5%, ROI: 10% (should not apply)
tc15 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5100, 4900, 5100, 6172, 1, 0],
[2, 5100, 5251, 4650, 5100, 6172, 0, 0],
[3, 4850, 5050, 4850, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.05, roi=0.01, profit_perc=-0.04,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=1),
BTrade(sell_reason=SellType.STOP_LOSS, open_tick=2, close_tick=2)]
)
TESTS = [
tc0,
tc1,
tc2,
tc3,
tc4,
tc5,
tc6,
tc7,
tc8,
tc9,
tc10,
tc11,
tc12,
tc13,
tc14,
tc15,
]
@pytest.mark.parametrize("data", TESTS)
def test_backtest_results(default_conf, fee, mocker, caplog, data) -> None:
"""
run functional tests
"""
default_conf["stoploss"] = data.stop_loss
default_conf["minimal_roi"] = {"0": data.roi}
default_conf["ticker_interval"] = tests_ticker_interval
default_conf["trailing_stop"] = data.trailing_stop
default_conf["trailing_only_offset_is_reached"] = data.trailing_only_offset_is_reached
# Only add this to configuration If it's necessary
if data.trailing_stop_positive:
default_conf["trailing_stop_positive"] = data.trailing_stop_positive
default_conf["trailing_stop_positive_offset"] = data.trailing_stop_positive_offset
default_conf["experimental"] = {"use_sell_signal": data.use_sell_signal}
mocker.patch("freqtrade.exchange.Exchange.get_fee", MagicMock(return_value=0.0))
patch_exchange(mocker)
frame = _build_backtest_dataframe(data.data)
backtesting = Backtesting(default_conf)
backtesting.advise_buy = lambda a, m: frame
backtesting.advise_sell = lambda a, m: frame
caplog.set_level(logging.DEBUG)
pair = "UNITTEST/BTC"
# Dummy data as we mock the analyze functions
data_processed = {pair: DataFrame()}
min_date, max_date = get_timeframe({pair: frame})
results = backtesting.backtest(
{
'stake_amount': default_conf['stake_amount'],
'processed': data_processed,
'max_open_trades': 10,
'start_date': min_date,
'end_date': max_date,
}
)
assert len(results) == len(data.trades)
assert round(results["profit_percent"].sum(), 3) == round(data.profit_perc, 3)
for c, trade in enumerate(data.trades):
res = results.iloc[c]
assert res.sell_reason == trade.sell_reason
assert res.open_time == _get_frame_time_from_offset(trade.open_tick)
assert res.close_time == _get_frame_time_from_offset(trade.close_tick)