stable/tests/optimize/test_backtest_detail.py

538 lines
23 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# pragma pylint: disable=missing-docstring, W0212, line-too-long, C0103, C0330, unused-argument
import logging
import pytest
from freqtrade.data.history import get_timerange
from freqtrade.optimize.backtesting import Backtesting
from freqtrade.strategy.interface import SellType
from tests.conftest import patch_exchange
from tests.optimize import (BTContainer, BTrade, _build_backtest_dataframe,
_get_frame_time_from_offset, tests_timeframe)
# Test 0: Sell with signal sell in candle 3
# Test with Stop-loss at 1%
tc0 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4986, 4600, 6172, 0, 0], # exit with stoploss hit
[3, 5010, 5000, 4980, 5010, 6172, 0, 1],
[4, 5010, 4987, 4977, 4995, 6172, 0, 0],
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi={"0": 1}, profit_perc=0.002, use_sell_signal=True,
trades=[BTrade(sell_reason=SellType.SELL_SIGNAL, open_tick=1, close_tick=4)]
)
# Test 1: Stop-Loss Triggered 1% loss
# Test with Stop-loss at 1%
tc1 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4600, 4600, 6172, 0, 0], # exit with stoploss hit
[3, 4975, 5000, 4980, 4977, 6172, 0, 0],
[4, 4977, 4987, 4977, 4995, 6172, 0, 0],
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi={"0": 1}, profit_perc=-0.01,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 2: Minus 4% Low, minus 1% close
# Test with Stop-Loss at 3%
tc2 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4962, 4975, 6172, 0, 0],
[3, 4975, 5000, 4800, 4962, 6172, 0, 0], # exit with stoploss hit
[4, 4962, 4987, 4937, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.03, roi={"0": 1}, profit_perc=-0.03,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 3: Multiple trades.
# Candle drops 4%, Recovers 1%.
# Entry Criteria Met
# Candle drops 20%
# Trade-A: Stop-Loss Triggered 2% Loss
# Trade-B: Stop-Loss Triggered 2% Loss
tc3 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4800, 4975, 6172, 0, 0], # exit with stoploss hit
[3, 4975, 5000, 4950, 4962, 6172, 1, 0],
[4, 4975, 5000, 4950, 4962, 6172, 0, 0], # enter trade 2 (signal on last candle)
[5, 4962, 4987, 4000, 4000, 6172, 0, 0], # exit with stoploss hit
[6, 4950, 4975, 4975, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi={"0": 1}, profit_perc=-0.04,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2),
BTrade(sell_reason=SellType.STOP_LOSS, open_tick=4, close_tick=5)]
)
# Test 4: Minus 3% / recovery +15%
# Candle Data for test 3 Candle drops 3% Closed 15% up
# Test with Stop-loss at 2% ROI 6%
# Stop-Loss Triggered 2% Loss
tc4 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5750, 4850, 5750, 6172, 0, 0], # Exit with stoploss hit
[3, 4975, 5000, 4950, 4962, 6172, 0, 0],
[4, 4962, 4987, 4937, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi={"0": 0.06}, profit_perc=-0.02,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 5: Drops 0.5% Closes +20%, ROI triggers 3% Gain
# stop-loss: 1%, ROI: 3%
tc5 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4980, 4987, 6172, 1, 0],
[1, 5000, 5025, 4980, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5025, 4975, 4987, 6172, 0, 0],
[3, 4975, 6000, 4975, 6000, 6172, 0, 0], # ROI
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi={"0": 0.03}, profit_perc=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 6: Drops 3% / Recovers 6% Positive / Closes 1% positve, Stop-Loss triggers 2% Loss
# stop-loss: 2% ROI: 5%
tc6 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5300, 4850, 5050, 6172, 0, 0], # Exit with stoploss
[3, 4975, 5000, 4950, 4962, 6172, 0, 0],
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi={"0": 0.05}, profit_perc=-0.02,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 7: 6% Positive / 1% Negative / Close 1% Positve, ROI Triggers 3% Gain
# stop-loss: 2% ROI: 3%
tc7 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5050, 6172, 0, 0],
[3, 4975, 5000, 4950, 4962, 6172, 0, 0],
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.02, roi={"0": 0.03}, profit_perc=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=2)]
)
# Test 8: trailing_stop should raise so candle 3 causes a stoploss.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted in candle 2
tc8 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5000, 6172, 0, 0],
[2, 5000, 5250, 4750, 4850, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10}, profit_perc=-0.055, trailing_stop=True,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 9: trailing_stop should raise - high and low in same candle.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted in candle 3
tc9 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5000, 6172, 0, 0],
[2, 5000, 5050, 4950, 5000, 6172, 0, 0],
[3, 5000, 5200, 4550, 4850, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10}, profit_perc=-0.064, trailing_stop=True,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 10: trailing_stop should raise so candle 3 causes a stoploss
# without applying trailing_stop_positive since stoploss_offset is at 10%.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc10 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10}, profit_perc=-0.1, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.10,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=4)]
)
# Test 11: trailing_stop should raise so candle 3 causes a stoploss
# applying a positive trailing stop of 3% since stop_positive_offset is reached.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc11 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 5000, 5150, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10}, profit_perc=0.019, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 12: trailing_stop should raise in candle 2 and cause a stoploss in the same candle
# applying a positive trailing stop of 3% since stop_positive_offset is reached.
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc12 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 4650, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10}, profit_perc=0.019, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=2)]
)
# Test 13: Buy and sell ROI on same candle
# stop-loss: 10% (should not apply), ROI: 1%
tc13 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5100, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 4850, 5100, 6172, 0, 0],
[3, 4850, 5050, 4850, 4750, 6172, 0, 0],
[4, 4750, 4950, 4850, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.01}, profit_perc=0.01,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=1)]
)
# Test 14 - Buy and Stoploss on same candle
# stop-loss: 5%, ROI: 10% (should not apply)
tc14 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5100, 4600, 5100, 6172, 0, 0],
[2, 5100, 5251, 4850, 5100, 6172, 0, 0],
[3, 4850, 5050, 4850, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.05, roi={"0": 0.10}, profit_perc=-0.05,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=1)]
)
# Test 15 - Buy and ROI on same candle, followed by buy and Stoploss on next candle
# stop-loss: 5%, ROI: 10% (should not apply)
tc15 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5100, 4900, 5100, 6172, 1, 0],
[2, 5100, 5251, 4650, 5100, 6172, 0, 0],
[3, 4850, 5050, 4850, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.05, roi={"0": 0.01}, profit_perc=-0.04,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=1),
BTrade(sell_reason=SellType.STOP_LOSS, open_tick=2, close_tick=2)]
)
# Test 16: Buy, hold for 65 min, then forcesell using roi=-1
# Causes negative profit even though sell-reason is ROI.
# stop-loss: 10%, ROI: 10% (should not apply), -100% after 65 minutes (limits trade duration)
tc16 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5050, 6172, 0, 0],
[3, 4975, 5000, 4940, 4962, 6172, 0, 0], # ForceSell on ROI (roi=-1)
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10, "65": -1}, profit_perc=-0.012,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 17: Buy, hold for 120 mins, then forcesell using roi=-1
# Causes negative profit even though sell-reason is ROI.
# stop-loss: 10%, ROI: 10% (should not apply), -100% after 100 minutes (limits trade duration)
# Uses open as sell-rate (special case) - since the roi-time is a multiple of the timeframe.
tc17 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5050, 6172, 0, 0],
[3, 4980, 5000, 4940, 4962, 6172, 0, 0], # ForceSell on ROI (roi=-1)
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10, "120": -1}, profit_perc=-0.004,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 18: Buy, hold for 120 mins, then drop ROI to 1%, causing a sell in candle 3.
# stop-loss: 10%, ROI: 10% (should not apply), -100% after 100 minutes (limits trade duration)
# uses open_rate as sell-price
tc18 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5200, 6172, 0, 0],
[3, 5200, 5220, 4940, 4962, 6172, 0, 0], # Sell on ROI (sells on open)
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4950, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10, "120": 0.01}, profit_perc=0.04,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 19: Buy, hold for 119 mins, then drop ROI to 1%, causing a sell in candle 3.
# stop-loss: 10%, ROI: 10% (should not apply), -100% after 100 minutes (limits trade duration)
# uses calculated ROI (1%) as sell rate, otherwise identical to tc18
tc19 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5200, 6172, 0, 0],
[3, 5000, 5300, 4940, 4962, 6172, 0, 0], # Sell on ROI
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4550, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10, "120": 0.01}, profit_perc=0.01,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 20: Buy, hold for 119 mins, then drop ROI to 1%, causing a sell in candle 3.
# stop-loss: 10%, ROI: 10% (should not apply), -100% after 100 minutes (limits trade duration)
# uses calculated ROI (1%) as sell rate, otherwise identical to tc18
tc20 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0],
[2, 4987, 5300, 4950, 5200, 6172, 0, 0],
[3, 5200, 5300, 4940, 4962, 6172, 0, 0], # Sell on ROI
[4, 4962, 4987, 4972, 4950, 6172, 0, 0],
[5, 4550, 4975, 4925, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10, "119": 0.01}, profit_perc=0.01,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 21: trailing_stop ROI collision.
# Roi should trigger before Trailing stop - otherwise Trailing stop profits can be > ROI
# which cannot happen in reality
# stop-loss: 10%, ROI: 4%, Trailing stop adjusted at the sell candle
tc21 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 4650, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.04}, profit_perc=0.04, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=2)]
)
# Test 22: trailing_stop Raises in candle 2 - but ROI applies at the same time.
# applying a positive trailing stop of 3% - ROI should apply before trailing stop.
# stop-loss: 10%, ROI: 4%, stoploss adjusted candle 2
tc22 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.04}, profit_perc=0.04, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=2)]
)
# Test 23: trailing_stop Raises in candle 2 (does not trigger)
# applying a positive trailing stop of 3% since stop_positive_offset is reached.
# ROI is changed after this to 4%, dropping ROI below trailing_stop_positive, causing a sell
# in the candle after the raised stoploss candle with ROI reason.
# Stoploss would trigger in this candle too, but it's no longer relevant.
# stop-loss: 10%, ROI: 4%, stoploss adjusted candle 2, ROI adjusted in candle 3 (causing the sell)
tc23 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 4850, 5251, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.1, "119": 0.03}, profit_perc=0.03, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 24: Sell with signal sell in candle 3 (stoploss also triggers on this candle)
# Stoploss at 1%.
# Stoploss wins over Sell-signal (because sell-signal is acted on in the next candle)
tc24 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4986, 4600, 6172, 0, 0],
[3, 5010, 5000, 4855, 5010, 6172, 0, 1], # Triggers stoploss + sellsignal
[4, 5010, 4987, 4977, 4995, 6172, 0, 0],
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi={"0": 1}, profit_perc=-0.01, use_sell_signal=True,
trades=[BTrade(sell_reason=SellType.STOP_LOSS, open_tick=1, close_tick=3)]
)
# Test 25: Sell with signal sell in candle 3 (stoploss also triggers on this candle)
# Stoploss at 1%.
# Sell-signal wins over stoploss
tc25 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4986, 4600, 6172, 0, 0],
[3, 5010, 5000, 4986, 5010, 6172, 0, 1],
[4, 5010, 4987, 4855, 4995, 6172, 0, 0], # Triggers stoploss + sellsignal acted on
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.01, roi={"0": 1}, profit_perc=0.002, use_sell_signal=True,
trades=[BTrade(sell_reason=SellType.SELL_SIGNAL, open_tick=1, close_tick=4)]
)
# Test 26: Sell with signal sell in candle 3 (ROI at signal candle)
# Stoploss at 10% (irrelevant), ROI at 5% (will trigger)
# Sell-signal wins over stoploss
tc26 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4986, 4600, 6172, 0, 0],
[3, 5010, 5251, 4986, 5010, 6172, 0, 1], # Triggers ROI, sell-signal
[4, 5010, 4987, 4855, 4995, 6172, 0, 0],
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.05}, profit_perc=0.05, use_sell_signal=True,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=3)]
)
# Test 27: Sell with signal sell in candle 3 (ROI at signal candle)
# Stoploss at 10% (irrelevant), ROI at 5% (will trigger) - Wins over Sell-signal
# TODO: figure out if sell-signal should win over ROI
# Sell-signal wins over stoploss
tc27 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5025, 4975, 4987, 6172, 1, 0],
[1, 5000, 5025, 4975, 4987, 6172, 0, 0], # enter trade (signal on last candle)
[2, 4987, 5012, 4986, 4600, 6172, 0, 0],
[3, 5010, 5012, 4986, 5010, 6172, 0, 1], # sell-signal
[4, 5010, 5251, 4855, 4995, 6172, 0, 0], # Triggers ROI, sell-signal acted on
[5, 4995, 4995, 4995, 4950, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.05}, profit_perc=0.05, use_sell_signal=True,
trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=4)]
)
# Test 28: trailing_stop should raise so candle 3 causes a stoploss
# Same case than tc11 - but candle 3 "gaps down" - the stoploss will be above the candle,
# therefore "open" will be used
# stop-loss: 10%, ROI: 10% (should not apply), stoploss adjusted candle 2
tc28 = BTContainer(data=[
# D O H L C V B S
[0, 5000, 5050, 4950, 5000, 6172, 1, 0],
[1, 5000, 5050, 4950, 5100, 6172, 0, 0],
[2, 5100, 5251, 5100, 5100, 6172, 0, 0],
[3, 4850, 5050, 4650, 4750, 6172, 0, 0],
[4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
stop_loss=-0.10, roi={"0": 0.10}, profit_perc=-0.03, trailing_stop=True,
trailing_only_offset_is_reached=True, trailing_stop_positive_offset=0.05,
trailing_stop_positive=0.03,
trades=[BTrade(sell_reason=SellType.TRAILING_STOP_LOSS, open_tick=1, close_tick=3)]
)
TESTS = [
tc0,
tc1,
tc2,
tc3,
tc4,
tc5,
tc6,
tc7,
tc8,
tc9,
tc10,
tc11,
tc12,
tc13,
tc14,
tc15,
tc16,
tc17,
tc18,
tc19,
tc20,
tc21,
tc22,
tc23,
tc24,
tc25,
tc26,
tc27,
tc28,
]
@pytest.mark.parametrize("data", TESTS)
def test_backtest_results(default_conf, fee, mocker, caplog, data) -> None:
"""
run functional tests
"""
default_conf["stoploss"] = data.stop_loss
default_conf["minimal_roi"] = data.roi
default_conf["timeframe"] = tests_timeframe
default_conf["trailing_stop"] = data.trailing_stop
default_conf["trailing_only_offset_is_reached"] = data.trailing_only_offset_is_reached
# Only add this to configuration If it's necessary
if data.trailing_stop_positive is not None:
default_conf["trailing_stop_positive"] = data.trailing_stop_positive
default_conf["trailing_stop_positive_offset"] = data.trailing_stop_positive_offset
default_conf["ask_strategy"] = {"use_sell_signal": data.use_sell_signal}
mocker.patch("freqtrade.exchange.Exchange.get_fee", return_value=0.0)
mocker.patch("freqtrade.exchange.Exchange.get_min_pair_stake_amount", return_value=0.00001)
patch_exchange(mocker)
frame = _build_backtest_dataframe(data.data)
backtesting = Backtesting(default_conf)
backtesting.strategy.advise_buy = lambda a, m: frame
backtesting.strategy.advise_sell = lambda a, m: frame
caplog.set_level(logging.DEBUG)
pair = "UNITTEST/BTC"
# Dummy data as we mock the analyze functions
data_processed = {pair: frame.copy()}
min_date, max_date = get_timerange({pair: frame})
result = backtesting.backtest(
processed=data_processed,
start_date=min_date,
end_date=max_date,
max_open_trades=10,
)
results = result['results']
assert len(results) == len(data.trades)
assert round(results["profit_ratio"].sum(), 3) == round(data.profit_perc, 3)
for c, trade in enumerate(data.trades):
res = results.iloc[c]
assert res.sell_reason == trade.sell_reason.value
assert res.open_date == _get_frame_time_from_offset(trade.open_tick)
assert res.close_date == _get_frame_time_from_offset(trade.close_tick)