Merge branch 'freqtrade:develop' into develop

docs/exchanges.md

@@ -60,11 +60,18 @@ Binance supports [time_in_force](configuration.md#understand-order_time_in_force
     Binance supports `stoploss_on_exchange` and uses `stop-loss-limit` orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
     On futures, Binance supports both `stop-limit` as well as `stop-market` orders. You can use either `"limit"` or `"market"` in the `order_types.stoploss` configuration setting to decide which type to use.
 
-### Binance Blacklist
+### Binance Blacklist recommendation
 
 For Binance, it is suggested to add `"BNB/<STAKE>"` to your blacklist to avoid issues, unless you are willing to maintain enough extra `BNB` on the account or unless you're willing to disable using `BNB` for fees.
 Binance accounts may use `BNB` for fees, and if a trade happens to be on `BNB`, further trades may consume this position and make the initial BNB trade unsellable as the expected amount is not there anymore.
 
+### Binance sites
+
+Binance has been split into 2, and users must use the correct ccxt exchange ID for their exchange, otherwise API keys are not recognized.
+
+* [binance.com](https://www.binance.com/) - International users. Use exchange id: `binance`.
+* [binance.us](https://www.binance.us/) - US based users. Use exchange id: `binanceus`.
+
 ### Binance Futures
 
 Binance has specific (unfortunately complex) [Futures Trading Quantitative Rules](https://www.binance.com/en/support/faq/4f462ebe6ff445d4a170be7d9e897272) which need to be followed, and which prohibit a too low stake-amount (among others) for too many orders.
@@ -87,12 +94,14 @@ When trading on Binance Futures market, orderbook must be used because there is
   },
 ```
 
-### Binance sites
+#### Binance futures settings
 
-Binance has been split into 2, and users must use the correct ccxt exchange ID for their exchange, otherwise API keys are not recognized.
+Users will also have to have the futures-setting "Position Mode" set to "One-way Mode", and "Asset Mode" set to "Single-Asset Mode".
+These settings will be checked on startup, and freqtrade will show an error if this setting is wrong.
 
-* [binance.com](https://www.binance.com/) - International users. Use exchange id: `binance`.
-* [binance.us](https://www.binance.us/) - US based users. Use exchange id: `binanceus`.
+![Binance futures settings](assets/binance_futures_settings.png)
+
+Freqtrade will not attempt to change these settings.
 
 ## Kraken
 

docs/freqai-parameter-table.md

@@ -27,8 +27,7 @@ Mandatory parameters are marked as **Required** and have to be set in one of the
 | `weight_factor` | Weight training data points according to their recency (see details [here](freqai-feature-engineering.md#weighting-features-for-temporal-importance)). <br> **Datatype:** Positive float (typically < 1).
 | `indicator_max_period_candles` | **No longer used (#7325)**. Replaced by `startup_candle_count` which is set in the [strategy](freqai-configuration.md#building-a-freqai-strategy). `startup_candle_count` is timeframe independent and defines the maximum *period* used in `populate_any_indicators()` for indicator creation. `FreqAI` uses this parameter together with the maximum timeframe in `include_time_frames` to calculate how many data points to download such that the first data point does not include a NaN <br> **Datatype:** Positive integer.
 | `indicator_periods_candles` | Time periods to calculate indicators for. The indicators are added to the base indicator dataset. <br> **Datatype:** List of positive integers.
-| `stratify_training_data` | Split the feature set into training and testing datasets. For example, `stratify_training_data: 2` would set every 2nd data point into a separate dataset to be pulled from during training/testing. See details about how it works [here](freqai-running.md#data-stratification-for-training-and-testing-the-model). <br> **Datatype:** Positive integer.
-| `principal_component_analysis` | Automatically reduce the dimensionality of the data set using Principal Component Analysis. See details about how it works [here](#reducing-data-dimensionality-with-principal-component-analysis) <br> **Datatype:** Boolean. defaults to `false`.
+| `principal_component_analysis` | Automatically reduce the dimensionality of the data set using Principal Component Analysis. See details about how it works [here](#reducing-data-dimensionality-with-principal-component-analysis) <br> **Datatype:** Boolean. defaults to `False`.
 | `plot_feature_importances` | Create a feature importance plot for each model for the top/bottom `plot_feature_importances` number of features.<br> **Datatype:** Integer, defaults to `0`.
 | `DI_threshold` | Activates the use of the Dissimilarity Index for outlier detection when set to > 0. See details about how it works [here](freqai-feature-engineering.md#identifying-outliers-with-the-dissimilarity-index-di). <br> **Datatype:** Positive float (typically < 1).
 | `use_SVM_to_remove_outliers` | Train a support vector machine to detect and remove outliers from the training dataset, as well as from incoming data points. See details about how it works [here](freqai-feature-engineering.md#identifying-outliers-using-a-support-vector-machine-svm). <br> **Datatype:** Boolean.
@@ -41,7 +40,7 @@ Mandatory parameters are marked as **Required** and have to be set in one of the
 |  |  **Data split parameters**
 | `data_split_parameters` | Include any additional parameters available from Scikit-learn `test_train_split()`, which are shown [here](https://scikit-learn.org/stable/modules/generated/sklearn.model_selection.train_test_split.html) (external website). <br> **Datatype:** Dictionary.
 | `test_size` | The fraction of data that should be used for testing instead of training. <br> **Datatype:** Positive float < 1.
-| `shuffle` | Shuffle the training data points during training. Typically, for time-series forecasting, this is set to `False`. <br> **Datatype:** Boolean.
+| `shuffle` | Shuffle the training data points during training. Typically, to not remove the chronological order of data in time-series forecasting, this is set to `False`. <br> **Datatype:** Boolean. <br> Defaut: `False`.
 |  |  **Model training parameters**
 | `model_training_parameters` | A flexible dictionary that includes all parameters available by the selected model library. For example, if you use `LightGBMRegressor`, this dictionary can contain any parameter available by the `LightGBMRegressor` [here](https://lightgbm.readthedocs.io/en/latest/pythonapi/lightgbm.LGBMRegressor.html) (external website). If you select a different model, this dictionary can contain any parameter from that model.  <br> **Datatype:** Dictionary.
 | `n_estimators` | The number of boosted trees to fit in regression. <br> **Datatype:** Integer.

docs/freqai-running.md

@@ -105,23 +105,6 @@ During dry/live mode, FreqAI trains each coin pair sequentially (on separate thr
 
 In the presented example config, the user will only allow predictions on models that are less than 1/2 hours old.
 
-## Data stratification for training and testing the model
-
-You can stratify (group) the training/testing data using:
-
-```json
-    "freqai": {
-        "feature_parameters" : {
-            "stratify_training_data": 3
-        }
-    }
-```
-
-This will split the data chronologically so that every Xth data point is used to test the model after training. In the example above, the user is asking for every third data point in the dataframe to be used for
-testing; the other points are used for training.
-
-The test data is used to evaluate the performance of the model after training. If the test score is high, the model is able to capture the behavior of the data well. If the test score is low, either the model does not capture the complexity of the data, the test data is significantly different from the train data, or a different type of model should be used.
-
 ## Controlling the model learning process
 
 Model training parameters are unique to the selected machine learning library. FreqAI allows you to set any parameter for any library using the `model_training_parameters` dictionary in the config. The example config (found in `config_examples/config_freqai.example.json`) shows some of the example parameters associated with `Catboost` and `LightGBM`, but you can add any parameters available in those libraries or any other machine learning library you choose to implement.

docs/includes/pairlists.md

@@ -22,6 +22,7 @@ You may also use something like `.*DOWN/BTC` or `.*UP/BTC` to exclude leveraged
 
 * [`StaticPairList`](#static-pair-list) (default, if not configured differently)
 * [`VolumePairList`](#volume-pair-list)
+* [`ProducerPairList`](#producerpairlist)
 * [`AgeFilter`](#agefilter)
 * [`OffsetFilter`](#offsetfilter)
 * [`PerformanceFilter`](#performancefilter)
@@ -84,7 +85,7 @@ Filtering instances (not the first position in the list) will not apply any cach
 
 You can define a minimum volume with `min_value` - which will filter out pairs with a volume lower than the specified value in the specified timerange.
 
-### VolumePairList Advanced mode
+##### VolumePairList Advanced mode
 
 `VolumePairList` can also operate in an advanced mode to build volume over a given timerange of specified candle size. It utilizes exchange historical candle data, builds a typical price (calculated by (open+high+low)/3) and multiplies the typical price with every candle's volume. The sum is the `quoteVolume` over the given range. This allows different scenarios, for a  more smoothened volume, when using longer ranges with larger candle sizes, or the opposite when using a short range with small candles.
 
@@ -146,6 +147,32 @@ More sophisticated approach can be used, by using `lookback_timeframe` for candl
 !!! Note
     `VolumePairList` does not support backtesting mode.
 
+#### ProducerPairList
+
+With `ProducerPairList`, you can reuse the pairlist from a [Producer](producer-consumer.md) without explicitly defining the pairlist on each consumer.
+
+[Consumer mode](producer-consumer.md) is required for this pairlist to work.
+
+The pairlist will perform a check on active pairs against the current exchange configuration to avoid attempting to trade on invalid markets.
+
+You can limit the length of the pairlist with the optional parameter `number_assets`. Using `"number_assets"=0` or omitting this key will result in the reuse of all producer pairs valid for the current setup.
+
+```json
+"pairlists": [
+    {
+        "method": "ProducerPairList",
+        "number_assets": 5,
+        "producer_name": "default",
+    }
+],
+```
+
+
+!!! Tip "Combining pairlists"
+    This pairlist can be combined with all other pairlists and filters for further pairlist reduction, and can also act as an "additional" pairlist, on top of already defined pairs.
+    `ProducerPairList` can also be used multiple times in sequence, combining the pairs from multiple producers.
+    Obviously in complex such configurations, the Producer may not provide data for all pairs, so the strategy must be fit for this.
+
 #### AgeFilter
 
 Removes pairs that have been listed on the exchange for less than `min_days_listed` days (defaults to `10`) or more than `max_days_listed` days (defaults `None` mean infinity).

docs/strategy-callbacks.md

@@ -643,7 +643,7 @@ This callback is **not** called when there is an open order (either buy or sell)
 
 Additional Buys are ignored once you have reached the maximum amount of extra buys that you have set on `max_entry_position_adjustment`, but the callback is called anyway looking for partial exits.
 
-Position adjustments will always be applied in the direction of the trade, so a positive value will always increase your position (negative values will decrease your position), no matter if it's a long or short trade. Modifications to leverage are not possible.
+Position adjustments will always be applied in the direction of the trade, so a positive value will always increase your position (negative values will decrease your position), no matter if it's a long or short trade. Modifications to leverage are not possible, and the stake-amount is assumed to be before applying leverage.
 
 !!! Note "About stake size"
     Using fixed stake size means it will be the amount used for the first order, just like without position adjustment.

docs/updating.md

@@ -37,3 +37,12 @@ pip install -e .
 # Ensure freqUI is at the latest version
 freqtrade install-ui 
 ```
+
+### Problems updating
+
+Update-problems usually come missing dependencies (you didn't follow the above instructions) - or from updated dependencies, which fail to install (for example TA-lib).
+Please refer to the corresponding installation sections (common problems linked below)
+
+Common problems and their solutions:
+
+* [ta-lib update on windows](windows_installation.md#2-install-ta-lib)

docs/windows_installation.md

@@ -34,7 +34,7 @@ python -m venv .env
 .env\Scripts\activate.ps1
 # optionally install ta-lib from wheel
 # Eventually adjust the below filename to match the downloaded wheel
-pip install --find-links build_helpers\ TA-Lib
+pip install --find-links build_helpers\ TA-Lib -U
 pip install -r requirements.txt
 pip install -e .
 freqtrade