diff --git a/docs/edge.md b/docs/edge.md
index dcefe7451..6a301b044 100644
--- a/docs/edge.md
+++ b/docs/edge.md
@@ -145,19 +145,19 @@ Edge module has following configuration options:
| Parameter | Description |
|------------|-------------|
-| `enabled` | If true, then Edge will run periodically.
*Defaults to `false`.*
***Datatype:*** *Boolean*
-| `process_throttle_secs` | How often should Edge run in seconds.
*Defaults to `3600` (once per hour).*
***Datatype:*** *Integer*
-| `calculate_since_number_of_days` | Number of days of data against which Edge calculates Win Rate, Risk Reward and Expectancy.
**Note** that it downloads historical data so increasing this number would lead to slowing down the bot.
*Defaults to `7`.*
***Datatype:*** *Integer*
-| `capital_available_percentage` | **DEPRECATED - [replaced with `tradable_balance_ratio`](configuration.md#Available balance)** This is the percentage of the total capital on exchange in stake currency.
As an example if you have 10 ETH available in your wallet on the exchange and this value is 0.5 (which is 50%), then the bot will use a maximum amount of 5 ETH for trading and considers it as available capital.
*Defaults to `0.5`.*
***Datatype:*** *Float*
-| `allowed_risk` | Ratio of allowed risk per trade.
*Defaults to `0.01` (1%)).*
***Datatype:*** *Float*
-| `stoploss_range_min` | Minimum stoploss.
*Defaults to `-0.01`.*
***Datatype:*** *Float*
-| `stoploss_range_max` | Maximum stoploss.
*Defaults to `-0.10`.*
***Datatype:*** *Float*
-| `stoploss_range_step` | As an example if this is set to -0.01 then Edge will test the strategy for `[-0.01, -0,02, -0,03 ..., -0.09, -0.10]` ranges.
**Note** than having a smaller step means having a bigger range which could lead to slow calculation.
If you set this parameter to -0.001, you then slow down the Edge calculation by a factor of 10.
*Defaults to `-0.001`.*
***Datatype:*** *Float*
-| `minimum_winrate` | It filters out pairs which don't have at least minimum_winrate.
This comes handy if you want to be conservative and don't comprise win rate in favour of risk reward ratio.
*Defaults to `0.60`.*
***Datatype:*** *Float*
-| `minimum_expectancy` | It filters out pairs which have the expectancy lower than this number.
Having an expectancy of 0.20 means if you put 10$ on a trade you expect a 12$ return.
*Defaults to `0.20`.*
***Datatype:*** *Float*
-| `min_trade_number` | When calculating *W*, *R* and *E* (expectancy) against historical data, you always want to have a minimum number of trades. The more this number is the more Edge is reliable.
Having a win rate of 100% on a single trade doesn't mean anything at all. But having a win rate of 70% over past 100 trades means clearly something.
*Defaults to `10` (it is highly recommended not to decrease this number).*
***Datatype:*** *Integer*
-| `max_trade_duration_minute` | Edge will filter out trades with long duration. If a trade is profitable after 1 month, it is hard to evaluate the strategy based on it. But if most of trades are profitable and they have maximum duration of 30 minutes, then it is clearly a good sign.
**NOTICE:** While configuring this value, you should take into consideration your ticker interval. As an example filtering out trades having duration less than one day for a strategy which has 4h interval does not make sense. Default value is set assuming your strategy interval is relatively small (1m or 5m, etc.).
*Defaults to `1440` (one day).*
***Datatype:*** *Integer*
-| `remove_pumps` | Edge will remove sudden pumps in a given market while going through historical data. However, given that pumps happen very often in crypto markets, we recommend you keep this off.
*Defaults to `false`.*
***Datatype:*** *Boolean*
+| `enabled` | If true, then Edge will run periodically.
*Defaults to `false`.*
**Datatype:** Boolean
+| `process_throttle_secs` | How often should Edge run in seconds.
*Defaults to `3600` (once per hour).*
**Datatype:** Integer
+| `calculate_since_number_of_days` | Number of days of data against which Edge calculates Win Rate, Risk Reward and Expectancy.
**Note** that it downloads historical data so increasing this number would lead to slowing down the bot.
*Defaults to `7`.*
**Datatype:** Integer
+| `capital_available_percentage` | **DEPRECATED - [replaced with `tradable_balance_ratio`](configuration.md#Available balance)** This is the percentage of the total capital on exchange in stake currency.
As an example if you have 10 ETH available in your wallet on the exchange and this value is 0.5 (which is 50%), then the bot will use a maximum amount of 5 ETH for trading and considers it as available capital.
*Defaults to `0.5`.*
**Datatype:** Float
+| `allowed_risk` | Ratio of allowed risk per trade.
*Defaults to `0.01` (1%)).*
**Datatype:** Float
+| `stoploss_range_min` | Minimum stoploss.
*Defaults to `-0.01`.*
**Datatype:** Float
+| `stoploss_range_max` | Maximum stoploss.
*Defaults to `-0.10`.*
**Datatype:** Float
+| `stoploss_range_step` | As an example if this is set to -0.01 then Edge will test the strategy for `[-0.01, -0,02, -0,03 ..., -0.09, -0.10]` ranges.
**Note** than having a smaller step means having a bigger range which could lead to slow calculation.
If you set this parameter to -0.001, you then slow down the Edge calculation by a factor of 10.
*Defaults to `-0.001`.*
**Datatype:** Float
+| `minimum_winrate` | It filters out pairs which don't have at least minimum_winrate.
This comes handy if you want to be conservative and don't comprise win rate in favour of risk reward ratio.
*Defaults to `0.60`.*
**Datatype:** Float
+| `minimum_expectancy` | It filters out pairs which have the expectancy lower than this number.
Having an expectancy of 0.20 means if you put 10$ on a trade you expect a 12$ return.
*Defaults to `0.20`.*
**Datatype:** Float
+| `min_trade_number` | When calculating *W*, *R* and *E* (expectancy) against historical data, you always want to have a minimum number of trades. The more this number is the more Edge is reliable.
Having a win rate of 100% on a single trade doesn't mean anything at all. But having a win rate of 70% over past 100 trades means clearly something.
*Defaults to `10` (it is highly recommended not to decrease this number).*
**Datatype:** Integer
+| `max_trade_duration_minute` | Edge will filter out trades with long duration. If a trade is profitable after 1 month, it is hard to evaluate the strategy based on it. But if most of trades are profitable and they have maximum duration of 30 minutes, then it is clearly a good sign.
**NOTICE:** While configuring this value, you should take into consideration your ticker interval. As an example filtering out trades having duration less than one day for a strategy which has 4h interval does not make sense. Default value is set assuming your strategy interval is relatively small (1m or 5m, etc.).
*Defaults to `1440` (one day).*
**Datatype:** Integer
+| `remove_pumps` | Edge will remove sudden pumps in a given market while going through historical data. However, given that pumps happen very often in crypto markets, we recommend you keep this off.
*Defaults to `false`.*
**Datatype:** Boolean
## Running Edge independently