2019-09-30 18:36:52 +00:00
# Utility Subcommands
Besides the Live-Trade and Dry-Run run modes, the `backtesting` , `edge` and `hyperopt` optimization subcommands, and the `download-data` subcommand which prepares historical data, the bot contains a number of utility subcommands. They are described in this section.
2019-11-01 14:02:42 +00:00
## Create userdir
Creates the directory structure to hold your files for freqtrade.
Will also create strategy and hyperopt examples for you to get started.
Can be used multiple times - using `--reset` will reset the sample strategy and hyperopt files to their default state.
```
usage: freqtrade create-userdir [-h] [--userdir PATH] [--reset]
optional arguments:
-h, --help show this help message and exit
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
--reset Reset sample files to their original state.
```
!!! Warning
Using `--reset` may result in loss of data, since this will overwrite all sample files without asking again.
```
├── backtest_results
├── data
├── hyperopt_results
├── hyperopts
│ ├── sample_hyperopt_advanced.py
│ ├── sample_hyperopt_loss.py
│ └── sample_hyperopt.py
├── notebooks
│ └── strategy_analysis_example.ipynb
├── plot
└── strategies
└── sample_strategy.py
```
2020-02-01 12:44:04 +00:00
## Create new config
Creates a new configuration file, asking some questions which are important selections for a configuration.
```
usage: freqtrade new-config [-h] [-c PATH]
optional arguments:
-h, --help show this help message and exit
-c PATH, --config PATH
Specify configuration file (default: `config.json` ). Multiple --config options may be used. Can be set to `-`
to read config from stdin.
```
!!! Warning
Only vital questions are asked. Freqtrade offers a lot more configuration possibilities, which are listed in the [Configuration documentation ](configuration.md#configuration-parameters )
2020-02-01 12:54:17 +00:00
### Create config examples
```
$ freqtrade new-config --config config_binance.json
? Do you want to enable Dry-run (simulated trades)? Yes
? Please insert your stake currency: BTC
? Please insert your stake amount: 0.05
2020-03-08 10:35:31 +00:00
? Please insert max_open_trades (Integer or 'unlimited'): 3
2020-06-02 08:06:26 +00:00
? Please insert your desired timeframe (e.g. 5m): 5m
2020-02-01 12:54:17 +00:00
? Please insert your display Currency (for reporting): USD
? Select exchange binance
? Do you want to enable Telegram? No
```
2019-11-17 09:31:21 +00:00
## Create new strategy
Creates a new strategy from a template similar to SampleStrategy.
The file will be named inline with your class name, and will not overwrite existing files.
Results will be located in `user_data/strategies/<strategyclassname>.py` .
``` output
usage: freqtrade new-strategy [-h] [--userdir PATH] [-s NAME]
2020-03-01 08:46:12 +00:00
[--template {full,minimal,advanced}]
2019-11-17 09:31:21 +00:00
optional arguments:
-h, --help show this help message and exit
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
-s NAME, --strategy NAME
Specify strategy class name which will be used by the
bot.
2020-03-01 08:46:12 +00:00
--template {full,minimal,advanced}
Use a template which is either `minimal` , `full`
(containing multiple sample indicators) or `advanced` .
Default: `full` .
2019-11-24 08:55:34 +00:00
2019-11-17 09:31:21 +00:00
```
2019-12-04 13:30:53 +00:00
### Sample usage of new-strategy
2019-11-17 09:31:21 +00:00
```bash
2019-12-04 13:30:53 +00:00
freqtrade new-strategy --strategy AwesomeStrategy
2019-11-17 09:31:21 +00:00
```
With custom user directory
```bash
2019-12-04 13:30:53 +00:00
freqtrade new-strategy --userdir ~/.freqtrade/ --strategy AwesomeStrategy
2019-11-17 09:31:21 +00:00
```
2020-03-01 08:46:12 +00:00
Using the advanced template (populates all optional functions and methods)
```bash
freqtrade new-strategy --strategy AwesomeStrategy --template advanced
```
2019-12-04 13:30:53 +00:00
## Create new hyperopt
Creates a new hyperopt from a template similar to SampleHyperopt.
The file will be named inline with your class name, and will not overwrite existing files.
Results will be located in `user_data/hyperopts/<classname>.py` .
2019-11-17 09:31:21 +00:00
``` output
usage: freqtrade new-hyperopt [-h] [--userdir PATH] [--hyperopt NAME]
2020-03-01 08:46:12 +00:00
[--template {full,minimal,advanced}]
2019-11-17 09:31:21 +00:00
optional arguments:
-h, --help show this help message and exit
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
--hyperopt NAME Specify hyperopt class name which will be used by the
bot.
2020-03-01 08:46:12 +00:00
--template {full,minimal,advanced}
Use a template which is either `minimal` , `full`
(containing multiple sample indicators) or `advanced` .
Default: `full` .
2019-11-17 09:31:21 +00:00
```
2019-11-01 14:02:42 +00:00
2019-12-04 13:30:53 +00:00
### Sample usage of new-hyperopt
```bash
freqtrade new-hyperopt --hyperopt AwesomeHyperopt
```
With custom user directory
```bash
freqtrade new-hyperopt --userdir ~/.freqtrade/ --hyperopt AwesomeHyperopt
```
2020-02-02 15:56:54 +00:00
## List Strategies and List Hyperopts
2019-12-24 14:35:53 +00:00
2020-02-02 15:56:54 +00:00
Use the `list-strategies` subcommand to see all strategies in one particular directory and the `list-hyperopts` subcommand to list custom Hyperopts.
2019-12-24 14:35:53 +00:00
2020-02-15 04:34:39 +00:00
These subcommands are useful for finding problems in your environment with loading strategies or hyperopt classes: modules with strategies or hyperopt classes that contain errors and failed to load are printed in red (LOAD FAILED), while strategies or hyperopt classes with duplicate names are printed in yellow (DUPLICATE NAME).
2019-12-24 14:35:53 +00:00
```
2020-02-15 04:34:39 +00:00
usage: freqtrade list-strategies [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH]
[--strategy-path PATH] [-1] [--no-color]
2019-12-24 14:35:53 +00:00
optional arguments:
-h, --help show this help message and exit
--strategy-path PATH Specify additional strategy lookup path.
-1, --one-column Print output in one column.
2020-02-15 04:34:39 +00:00
--no-color Disable colorization of hyperopt results. May be
useful if you are redirecting output to a file.
2019-12-24 14:35:53 +00:00
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
2020-02-15 04:34:39 +00:00
--logfile FILE Log to the file specified. Special values are:
'syslog', 'journald'. See the documentation for more
details.
2019-12-24 14:35:53 +00:00
-V, --version show program's version number and exit
-c PATH, --config PATH
2020-02-15 04:34:39 +00:00
Specify configuration file (default: `config.json` ).
Multiple --config options may be used. Can be set to
`-` to read config from stdin.
2019-12-24 14:35:53 +00:00
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
```
2020-02-02 15:56:54 +00:00
```
usage: freqtrade list-hyperopts [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH]
2020-02-15 04:34:39 +00:00
[--hyperopt-path PATH] [-1] [--no-color]
2020-02-02 15:56:54 +00:00
optional arguments:
-h, --help show this help message and exit
--hyperopt-path PATH Specify additional lookup path for Hyperopt and
Hyperopt Loss functions.
-1, --one-column Print output in one column.
2020-02-15 04:34:39 +00:00
--no-color Disable colorization of hyperopt results. May be
useful if you are redirecting output to a file.
2020-02-02 15:56:54 +00:00
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
--logfile FILE Log to the file specified. Special values are:
'syslog', 'journald'. See the documentation for more
details.
-V, --version show program's version number and exit
-c PATH, --config PATH
Specify configuration file (default: `config.json` ).
Multiple --config options may be used. Can be set to
`-` to read config from stdin.
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
```
2019-12-24 14:40:49 +00:00
!!! Warning
2020-02-02 15:56:54 +00:00
Using these commands will try to load all python files from a directory. This can be a security risk if untrusted files reside in this directory, since all module-level code is executed.
2019-12-24 14:40:49 +00:00
2020-02-02 15:56:54 +00:00
Example: Search default strategies and hyperopts directories (within the default userdir).
``` bash
freqtrade list-strategies
freqtrade list-hyperopts
```
Example: Search strategies and hyperopts directory within the userdir.
2019-12-24 14:35:53 +00:00
``` bash
2019-12-28 05:25:45 +00:00
freqtrade list-strategies --userdir ~/.freqtrade/
2020-02-02 15:56:54 +00:00
freqtrade list-hyperopts --userdir ~/.freqtrade/
2019-12-24 14:35:53 +00:00
```
2020-02-02 15:56:54 +00:00
Example: Search dedicated strategy path.
2019-12-24 14:35:53 +00:00
``` bash
freqtrade list-strategies --strategy-path ~/.freqtrade/strategies/
```
2020-02-02 15:56:54 +00:00
Example: Search dedicated hyperopt path.
``` bash
freqtrade list-hyperopt --hyperopt-path ~/.freqtrade/hyperopts/
```
2019-09-30 18:36:52 +00:00
## List Exchanges
2019-10-01 17:26:44 +00:00
Use the `list-exchanges` subcommand to see the exchanges available for the bot.
2019-09-30 18:36:52 +00:00
```
2019-10-01 13:57:35 +00:00
usage: freqtrade list-exchanges [-h] [-1] [-a]
2019-09-30 18:36:52 +00:00
optional arguments:
-h, --help show this help message and exit
2019-10-10 17:44:24 +00:00
-1, --one-column Print output in one column.
2019-10-01 13:57:35 +00:00
-a, --all Print all exchanges known to the ccxt library.
2019-09-30 18:36:52 +00:00
```
2019-10-01 17:26:44 +00:00
* Example: see exchanges available for the bot:
```
$ freqtrade list-exchanges
Exchanges available for Freqtrade: _1btcxe, acx, allcoin, bequant, bibox, binance, binanceje, binanceus, bitbank, bitfinex, bitfinex2, bitkk, bitlish, bitmart, bittrex, bitz, bleutrade, btcalpha, btcmarkets, btcturk, buda, cex, cobinhood, coinbaseprime, coinbasepro, coinex, cointiger, coss, crex24, digifinex, dsx, dx, ethfinex, fcoin, fcoinjp, gateio, gdax, gemini, hitbtc2, huobipro, huobiru, idex, kkex, kraken, kucoin, kucoin2, kuna, lbank, mandala, mercado, oceanex, okcoincny, okcoinusd, okex, okex3, poloniex, rightbtc, theocean, tidebit, upbit, zb
```
* Example: see all exchanges supported by the ccxt library (including 'bad' ones, i.e. those that are known to not work with Freqtrade):
```
$ freqtrade list-exchanges -a
All exchanges supported by the ccxt library: _1btcxe, acx, adara, allcoin, anxpro, bcex, bequant, bibox, bigone, binance, binanceje, binanceus, bit2c, bitbank, bitbay, bitfinex, bitfinex2, bitflyer, bitforex, bithumb, bitkk, bitlish, bitmart, bitmex, bitso, bitstamp, bitstamp1, bittrex, bitz, bl3p, bleutrade, braziliex, btcalpha, btcbox, btcchina, btcmarkets, btctradeim, btctradeua, btcturk, buda, bxinth, cex, chilebit, cobinhood, coinbase, coinbaseprime, coinbasepro, coincheck, coinegg, coinex, coinexchange, coinfalcon, coinfloor, coingi, coinmarketcap, coinmate, coinone, coinspot, cointiger, coolcoin, coss, crex24, crypton, deribit, digifinex, dsx, dx, ethfinex, exmo, exx, fcoin, fcoinjp, flowbtc, foxbit, fybse, gateio, gdax, gemini, hitbtc, hitbtc2, huobipro, huobiru, ice3x, idex, independentreserve, indodax, itbit, kkex, kraken, kucoin, kucoin2, kuna, lakebtc, latoken, lbank, liquid, livecoin, luno, lykke, mandala, mercado, mixcoins, negociecoins, nova, oceanex, okcoincny, okcoinusd, okex, okex3, paymium, poloniex, rightbtc, southxchange, stronghold, surbitcoin, theocean, therock, tidebit, tidex, upbit, vaultoro, vbtc, virwox, xbtce, yobit, zaif, zb
```
2019-09-30 18:36:52 +00:00
## List Timeframes
2020-03-08 10:35:31 +00:00
Use the `list-timeframes` subcommand to see the list of timeframes (ticker intervals) available for the exchange.
2019-10-01 17:26:44 +00:00
2019-09-30 18:36:52 +00:00
```
2020-02-01 12:52:25 +00:00
usage: freqtrade list-timeframes [-h] [-v] [--logfile FILE] [-V] [-c PATH] [-d PATH] [--userdir PATH] [--exchange EXCHANGE] [-1]
2019-09-30 18:36:52 +00:00
optional arguments:
2020-02-01 12:52:25 +00:00
-h, --help show this help message and exit
--exchange EXCHANGE Exchange name (default: `bittrex` ). Only valid if no config is provided.
-1, --one-column Print output in one column.
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
--logfile FILE Log to the file specified. Special values are: 'syslog', 'journald'. See the documentation for more details.
-V, --version show program's version number and exit
-c PATH, --config PATH
Specify configuration file (default: `config.json` ). Multiple --config options may be used. Can be set to `-`
to read config from stdin.
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
2019-09-30 18:36:52 +00:00
```
2019-10-01 17:26:44 +00:00
* Example: see the timeframes for the 'binance' exchange, set in the configuration file:
```
2020-02-01 12:52:25 +00:00
$ freqtrade list-timeframes -c config_binance.json
2019-10-01 17:26:44 +00:00
...
Timeframes available for the exchange `binance` : 1m, 3m, 5m, 15m, 30m, 1h, 2h, 4h, 6h, 8h, 12h, 1d, 3d, 1w, 1M
```
* Example: enumerate exchanges available for Freqtrade and print timeframes supported by each of them:
```
$ for i in `freqtrade list-exchanges -1` ; do freqtrade list-timeframes --exchange $i; done
```
2019-10-17 14:18:26 +00:00
## List pairs/list markets
The `list-pairs` and `list-markets` subcommands allow to see the pairs/markets available on exchange.
2019-10-20 20:00:17 +00:00
Pairs are markets with the '/' character between the base currency part and the quote currency part in the market symbol.
For example, in the 'ETH/BTC' pair 'ETH' is the base currency, while 'BTC' is the quote currency.
2019-10-21 11:06:46 +00:00
For pairs traded by Freqtrade the pair quote currency is defined by the value of the `stake_currency` configuration setting.
You can print info about any pair/market with these subcommands - and you can filter output by quote-currency using `--quote BTC` , or by base-currency using `--base ETH` options correspondingly.
2019-10-17 14:18:26 +00:00
These subcommands have same usage and same set of available options:
```
2020-02-01 12:52:25 +00:00
usage: freqtrade list-markets [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH] [--exchange EXCHANGE]
[--print-list] [--print-json] [-1] [--print-csv]
2019-10-20 20:00:17 +00:00
[--base BASE_CURRENCY [BASE_CURRENCY ...]]
[--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
[-a]
2020-02-01 12:52:25 +00:00
usage: freqtrade list-pairs [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH] [--exchange EXCHANGE]
[--print-list] [--print-json] [-1] [--print-csv]
2019-10-20 20:00:17 +00:00
[--base BASE_CURRENCY [BASE_CURRENCY ...]]
[--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]] [-a]
2019-10-17 14:18:26 +00:00
optional arguments:
-h, --help show this help message and exit
--exchange EXCHANGE Exchange name (default: `bittrex` ). Only valid if no
config is provided.
--print-list Print list of pairs or market symbols. By default data
is printed in the tabular format.
--print-json Print list of pairs or market symbols in JSON format.
-1, --one-column Print output in one column.
--print-csv Print exchange pair or market data in the csv format.
--base BASE_CURRENCY [BASE_CURRENCY ...]
Specify base currency(-ies). Space-separated list.
--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
Specify quote currency(-ies). Space-separated list.
-a, --all Print all pairs or market symbols. By default only
active ones are shown.
2020-02-01 12:52:25 +00:00
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
--logfile FILE Log to the file specified. Special values are:
'syslog', 'journald'. See the documentation for more
details.
-V, --version show program's version number and exit
-c PATH, --config PATH
Specify configuration file (default: `config.json` ).
Multiple --config options may be used. Can be set to
`-` to read config from stdin.
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
2019-10-17 14:18:26 +00:00
```
By default, only active pairs/markets are shown. Active pairs/markets are those that can currently be traded
on the exchange. The see the list of all pairs/markets (not only the active ones), use the `-a` /`-all` option.
Pairs/markets are sorted by its symbol string in the printed output.
### Examples
* Print the list of active pairs with quote currency USD on exchange, specified in the default
configuration file (i.e. pairs on the "Bittrex" exchange) in JSON format:
```
$ freqtrade list-pairs --quote USD --print-json
```
* Print the list of all pairs on the exchange, specified in the `config_binance.json` configuration file
(i.e. on the "Binance" exchange) with base currencies BTC or ETH and quote currencies USDT or USD, as the
human-readable list with summary:
```
2020-02-01 12:52:25 +00:00
$ freqtrade list-pairs -c config_binance.json --all --base BTC ETH --quote USDT USD --print-list
2019-10-17 14:18:26 +00:00
```
* Print all markets on exchange "Kraken", in the tabular format:
```
$ freqtrade list-markets --exchange kraken --all
```
2019-12-03 15:15:10 +00:00
## Test pairlist
Use the `test-pairlist` subcommand to test the configuration of [dynamic pairlists ](configuration.md#pairlists ).
Requires a configuration with specified `pairlists` attribute.
Can be used to generate static pairlists to be used during backtesting / hyperopt.
```
usage: freqtrade test-pairlist [-h] [-c PATH]
[--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
[-1] [--print-json]
optional arguments:
-h, --help show this help message and exit
-c PATH, --config PATH
Specify configuration file (default: `config.json` ).
Multiple --config options may be used. Can be set to
`-` to read config from stdin.
--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
Specify quote currency(-ies). Space-separated list.
-1, --one-column Print output in one column.
--print-json Print list of pairs or market symbols in JSON format.
```
2019-12-04 13:30:53 +00:00
### Examples
Show whitelist when using a [dynamic pairlist ](configuration.md#pairlists ).
```
freqtrade test-pairlist --config config.json --quote USDT BTC
```
2019-12-05 11:16:18 +00:00
## List Hyperopt results
2020-09-27 15:09:33 +00:00
You can list the hyperoptimization epochs the Hyperopt module evaluated previously with the `hyperopt-list` sub-command.
2019-12-05 11:16:18 +00:00
```
usage: freqtrade hyperopt-list [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH] [--best]
2020-02-11 15:02:08 +00:00
[--profitable] [--min-trades INT]
[--max-trades INT] [--min-avg-time FLOAT]
2020-02-10 19:54:31 +00:00
[--max-avg-time FLOAT] [--min-avg-profit FLOAT]
2020-02-11 20:29:55 +00:00
[--max-avg-profit FLOAT]
2020-09-27 15:09:33 +00:00
[--min-total-profit FLOAT]
[--max-total-profit FLOAT]
2020-03-22 01:22:06 +00:00
[--min-objective FLOAT] [--max-objective FLOAT]
[--no-color] [--print-json] [--no-details]
2020-09-27 15:09:33 +00:00
[--hyperopt-filename PATH] [--export-csv FILE]
2019-12-05 11:16:18 +00:00
optional arguments:
-h, --help show this help message and exit
--best Select only best epochs.
--profitable Select only profitable epochs.
2020-02-11 15:02:08 +00:00
--min-trades INT Select epochs with more than INT trades.
--max-trades INT Select epochs with less than INT trades.
2020-09-27 15:09:33 +00:00
--min-avg-time FLOAT Select epochs above average time.
--max-avg-time FLOAT Select epochs below average time.
2020-02-10 19:54:31 +00:00
--min-avg-profit FLOAT
2020-09-27 15:09:33 +00:00
Select epochs above average profit.
2020-02-11 20:29:55 +00:00
--max-avg-profit FLOAT
2020-09-27 15:09:33 +00:00
Select epochs below average profit.
2020-02-10 19:54:31 +00:00
--min-total-profit FLOAT
2020-09-27 15:09:33 +00:00
Select epochs above total profit.
2020-02-11 20:29:55 +00:00
--max-total-profit FLOAT
2020-09-27 15:09:33 +00:00
Select epochs below total profit.
2020-03-22 01:22:06 +00:00
--min-objective FLOAT
2020-09-27 15:09:33 +00:00
Select epochs above objective.
2020-03-22 01:22:06 +00:00
--max-objective FLOAT
2020-09-27 15:09:33 +00:00
Select epochs below objective.
2019-12-05 11:16:18 +00:00
--no-color Disable colorization of hyperopt results. May be
useful if you are redirecting output to a file.
2020-09-27 15:09:33 +00:00
--print-json Print output in JSON format.
2019-12-05 11:16:18 +00:00
--no-details Do not print best epoch details.
2020-09-27 15:09:33 +00:00
--hyperopt-filename FILENAME
Hyperopt result filename.Example: `--hyperopt-
filename=hyperopt_results_2020-09-27_16-20-48.pickle`
2020-03-09 17:53:30 +00:00
--export-csv FILE Export to CSV-File. This will disable table print.
Example: --export-csv hyperopt.csv
2020-02-10 19:54:31 +00:00
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
--logfile FILE Log to the file specified. Special values are:
'syslog', 'journald'. See the documentation for more
details.
-V, --version show program's version number and exit
-c PATH, --config PATH
2020-03-09 17:53:30 +00:00
Specify configuration file (default:
`userdir/config.json` or `config.json` whichever
exists). Multiple --config options may be used. Can be
set to `-` to read config from stdin.
2020-02-10 19:54:31 +00:00
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
2019-12-09 21:33:57 +00:00
```
2020-09-27 15:09:33 +00:00
!!! Note
`hyperopt-list` will automatically use the latest available hyperopt results file.
You can override this using the `--hyperopt-filename` argument, and specify another, available filename (without path!).
2019-12-05 11:16:18 +00:00
### Examples
List all results, print details of the best result at the end:
```
freqtrade hyperopt-list
```
List only epochs with positive profit. Do not print the details of the best epoch, so that the list can be iterated in a script:
```
freqtrade hyperopt-list --profitable --no-details
```
## Show details of Hyperopt results
You can show the details of any hyperoptimization epoch previously evaluated by the Hyperopt module with the `hyperopt-show` subcommand.
```
usage: freqtrade hyperopt-show [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH] [--best]
[--profitable] [-n INT] [--print-json]
2020-09-27 15:09:33 +00:00
[--hyperopt-filename PATH] [--no-header]
2019-12-05 11:16:18 +00:00
optional arguments:
-h, --help show this help message and exit
--best Select only best epochs.
--profitable Select only profitable epochs.
-n INT, --index INT Specify the index of the epoch to print details for.
2020-09-27 15:09:33 +00:00
--print-json Print output in JSON format.
--hyperopt-filename FILENAME
Hyperopt result filename.Example: `--hyperopt-
filename=hyperopt_results_2020-09-27_16-20-48.pickle`
2019-12-05 11:16:18 +00:00
--no-header Do not print epoch details header.
2020-09-27 15:09:33 +00:00
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
--logfile FILE Log to the file specified. Special values are:
'syslog', 'journald'. See the documentation for more
details.
-V, --version show program's version number and exit
-c PATH, --config PATH
Specify configuration file (default:
`userdir/config.json` or `config.json` whichever
exists). Multiple --config options may be used. Can be
set to `-` to read config from stdin.
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
2019-12-05 11:16:18 +00:00
```
2020-09-27 15:09:33 +00:00
!!! Note
`hyperopt-show` will automatically use the latest available hyperopt results file.
You can override this using the `--hyperopt-filename` argument, and specify another, available filename (without path!).
2019-12-05 11:16:18 +00:00
### Examples
Print details for the epoch 168 (the number of the epoch is shown by the `hyperopt-list` subcommand or by Hyperopt itself during hyperoptimization run):
```
freqtrade hyperopt-show -n 168
```
Prints JSON data with details for the last best epoch (i.e., the best of all epochs):
```
freqtrade hyperopt-show --best -n -1 --print-json --no-header
```
2020-05-02 09:50:48 +00:00
## Show trades
Print selected (or all) trades from database to screen.
```
usage: freqtrade show-trades [-h] [-v] [--logfile FILE] [-V] [-c PATH]
[-d PATH] [--userdir PATH] [--db-url PATH]
2020-05-03 13:32:09 +00:00
[--trade-ids TRADE_IDS [TRADE_IDS ...]]
2020-05-02 09:50:48 +00:00
[--print-json]
optional arguments:
-h, --help show this help message and exit
--db-url PATH Override trades database URL, this is useful in custom
deployments (default: `sqlite:///tradesv3.sqlite` for
Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
Dry Run).
2020-05-03 13:32:09 +00:00
--trade-ids TRADE_IDS [TRADE_IDS ...]
Specify the list of trade ids.
2020-05-02 09:50:48 +00:00
--print-json Print output in JSON format.
Common arguments:
-v, --verbose Verbose mode (-vv for more, -vvv to get all messages).
--logfile FILE Log to the file specified. Special values are:
'syslog', 'journald'. See the documentation for more
details.
-V, --version show program's version number and exit
-c PATH, --config PATH
Specify configuration file (default:
`userdir/config.json` or `config.json` whichever
exists). Multiple --config options may be used. Can be
set to `-` to read config from stdin.
-d PATH, --datadir PATH
Path to directory with historical backtesting data.
--userdir PATH, --user-data-dir PATH
Path to userdata directory.
```
### Examples
Print trades with id 2 and 3 as json
``` bash
2020-05-03 13:32:09 +00:00
freqtrade show-trades --db-url sqlite:///tradesv3.sqlite --trade-ids 2 3 --print-json
2020-05-02 09:50:48 +00:00
```
