Commit Graph

16 Commits

Author SHA1 Message Date
leonnicolas
6a696e03e7
migrate to golang.zx2c4.com/wireguard/wgctrl (#239)
* migrate to golang.zx2c4.com/wireguard/wgctrl

This commit introduces the usage of wgctrl.
It avoids the usage of exec calls of the wg command
and parsing the output of `wg show`.

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* vendor wgctrl

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* apply suggestions from code review

Remove wireguard.Enpoint struct and use net.UDPAddr for the resolved
endpoint and addr string (dnsanme:port) if a DN was supplied.

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* pkg/*: use wireguard.Enpoint

This commit introduces the wireguard.Enpoint struct.
It encapsulates a DN name with port and a net.UPDAddr.
The fields are private and only accessible over exported Methods
to avoid accidental modification.

Also iptables.GetProtocol is improved to avoid ipv4 rules being applied
by `ip6tables`.

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* pkg/wireguard/conf_test.go: add tests for Endpoint

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* cmd/kg/main.go: validate port range

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* add suggestions from review

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* pkg/mesh/mesh.go: use Equal func

Implement an Equal func for Enpoint and use it instead of comparing
strings.

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* cmd/kgctl/main.go: check port range

Signed-off-by: leonnicolas <leonloechner@gmx.de>

* vendor

Signed-off-by: leonnicolas <leonloechner@gmx.de>
2022-01-30 17:38:45 +01:00
leonnicolas
70d2751030
bumg golang 1.15 -> 1.17
Signed-off-by: leonnicolas <leonloechner@gmx.de>
2021-09-30 17:47:47 +02:00
Lucas Servén Marín
2c74a560c4
pkg/wireguard: allow configuring MTU (#215)
This commit makes it possible to configure the MTU for the WireGuard
interface created by Kilo.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2021-07-16 14:23:11 +02:00
Julien Viard de Galbert
e12b5029d7
Use LatestHandshake to validate endpoint (#149)
* wireguard: `wg show iface dump` reader and parser

* mesh: use LatestHandshake to validate NAT Endpoints

* add skip on error

* switch to loop parsing

So the stop on error pattern can be used

* Add error handling to ParseDump
2021-07-06 14:14:59 +02:00
Julien Viard de Galbert
2ac000c68a
Nat to nat (#146)
* wireguard: export an Endpoint comparison method

* Record discovered endpoints in node

* Synchronize DiscoveredEndpoints in k8s backend

* Add discoveredEndpointsAreEqual

* Handle discovered Endpoints in topology to enable NAT 2 NAT

* Refactor to use Endpoint.Equal

Compare IP first by default and compare DNS name first when we know the Endpoint was resolved.

* Drop the shallow copies of nodes and peers

Now that updateNATEndpoints was updated to discoverNATEndpoints and that
the endpoints are overridden by topology instead of mutating the nodes and
peers object, we can safely drop this copy.
2021-04-21 19:47:29 +02:00
Lucas Servén Marín
45cedbb84a
pkg/*: allow kgctl to compile for other OSes
This commit enables the compilation of kgctl when GOOS!=linux.
This fixes #56.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2020-11-14 12:16:07 +01:00
Lucas Servén Marín
0a10dc921c
pkg/k8s/apis: support for preshared keys in peers
This commit adds support for defining preshared keys when declaring a
new Peer CRD. This preshared key will be used whenever the nodes in the
Kilo mesh communicate with that peer.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2020-05-05 11:36:43 +02:00
Lucas Servén Marín
810dae695e
pkg/wireguard: edge case when endpoints are nil
Peers may have nil endpoints, a case which must be gracefully handled.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2020-03-06 15:21:30 +01:00
Lucas Servén Marín
29280a987e
pkg/mesh,pkg/wireguard: sync NAT endpoints
This commit changes how Kilo allows nodes and peers behind NAT to roam.
Rather that ignore changes to endpoints when comparing WireGuard
configurations, Kilo now incorporates changes to endpoints for peers
behind NAT into its configuration first and later compares the
configurations.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2020-03-04 01:37:08 +01:00
Lucas Servén Marín
0d199db009
pkg/wireguard: ignore changes to peers behind NAT
This commit enables Kilo to ignore changes to the endpoints of peers
that sit behind a NAT gateway. We use the heuristic of a non-zero
persistent keepalive to decide whether the endpoint field should be
ignored. This will allow NATed peers to roam and for every node in the
cluster to have a different value for a peer's endpoint, as is natural
when a peer's connections are NATed.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2020-02-28 14:56:02 +01:00
Lucas Servén Marín
aa376ff0d1
pkg/mesh,pkg/wireguard: allow DNS name endpoints
This commit allows DNS names to be used when specifying the endpoint
for a node in the WireGuard mesh. This is useful in many scenarios, in
particular when operating an IoT device whose public IP is dynamic. This
change allows the administrator to use a dynamic DNS name in the node's
endpoint.

One of the side-effects of this change is that the WireGuard port can
now be specified individually for each node in the mesh, if the
administrator wishes to do so.

*Note*: this commit introduces a breaking change; the
`force-external-ip` node annotation has been removed; its functionality
has been ported over to the `force-endpoint` annotation. This annotation
is documented in the annotations.md file. The expected content of this
annotation is no longer a CIDR but rather a host:port. The host can be
either a DNS name or an IP.

Signed-off-by: Lucas Servén Marín <lserven@gmail.com>
2020-02-22 17:17:13 +01:00
Lucas Servén Marín
20349de548
pkg/wireguard: allow specifying iface named
This commit makes it possible to specify the Kilo interface name. If the
specified interface exists, it will be used; if it does not exist, Kilo
will create it. If the interface already existed, then it will not be
deleted on shutdown; otherwise Kilo will destroy the interface.

Fixes: https://github.com/squat/kilo/issues/8
Addresses: 1/2 of https://github.com/squat/kilo/issues/17
2019-09-24 16:05:10 +02:00
Lucas Servén Marín
35390054ba
pkg: deduplicate peer IP addresses
We need to defensively deduplicate peer allowed IPs.
If two peers claim the same IP, the WireGuard configuration
could flap, causing the interface to churn.
2019-05-10 02:07:42 +02:00
Lucas Servén Marín
cd9c83b3bc
pkg/wireguard: simplify returns 2019-05-03 13:49:55 +02:00
Lucas Servén Marín
2425a06cd8
*: add peer VPN support
This commit adds support for defining arbitrary peers that should have
access to the VPN. In k8s, this is accomplished using the new Peer CRD.
2019-05-03 12:53:44 +02:00
Lucas Serven
e989f0a25f
init 2019-01-18 02:50:10 +01:00